The Panametrics-NDT Microscan transducers
are frequently used with the Series 25 and Series 35 thickness gages, as well
as other commercially available thickness gages, flaw detectors and ultrasonic
instrumentation.
Microscan transducer part numbers reflect
the connector designation:
RM = Right Angle Microdot®
SM = Straight Microdot
RB = Right Angle BNC
SB = Straight BNC
SU = Straight UHF
When selecting a transducer, please review
the chart below or consult the Transducer
Frequency Range in the Instruction Manual that was shipped with your gage.
Thickness Gage ModelTransducer
Frequency Range
45MG
38DL PLUS
2.0 to 30 MHz
Contact Transducers
One of the advantages of a Panametrics-NDT
Microscan contact transducer is its versatility; a single transducer can cover
a broad thickness range in many engineering materials. Contact transducers are
constructed with the unique WC-5 wearplate for greater durability and a longer
life.
Frequency
(MHz) Element
inches Diameter
mm Transducer
Part Number Transducer
Part Code
0.5
1 25
M101-SB U8400017
1
1 25
M102-SB U8400018
1
0.5 13
M103-SB U8400020
2.25
0.5 13
M106-RM, M106-SM U8400023, U8400025
2.25
0.5 13
M1036? U8400019
5
0.5 13
M109-RM, M109-SM U8400027, U8400028
5
0.25 6 M110-RM, M110-SM, M110H-RM**
U8400030, U8400031, U8400029
10
0.25 6 M112-RM, M112-SM, M112H-RM**
U8400034, U8400035, U8400033
10
0.125 3 M1016 U8400015
20
0.125 3 M116-RM, M116-SM
U8400038, U8400039
20
0.125 3 M116H-RM* U8400037
RM = Right Angle Microdot; SM = Straight
Microdot; SB = Straight BNC
?High
Penetration Transducer *Use with Holder, P/N 2133 **Use with Holder, P/N 2132